Select from the following options:
Daisy-chain:
With the daisy-chain option, 1″ wide nylon webbing is sewn to the perimeter of the bag, creating a series of loops for the provided Velcro OneWrap straps to be secured through.
This option allows for easy installation and is most likely to fit multiple bikes because of the adjustable strap positioning.
Velcro:
With the Velcro option, 2″ wide Velcro is carefully positioned and sewn into the seam of the bag, around any existing cables and braze-ons.
This option allows for easy installation and removal and pulls the bag tight, reducing the amount of side bulge.
Lace-up:
With the lace-up option, custom cut black CSM (formerly Hypalon) or beige 3/4″ webbing loops are sewn into the seam of the bag, allowing for the option of shock cord or paracord to be interlaced over the bike frame tubing.
The shock cord lace-up option provides zipper relief when the bag is fully loaded.
Unlike Velcro, the lace-up connection doesn’t catch on clothing.
With the bolt-on option, metal oblong grommets are installed into the perimeter of the bag, carefully aligned with the existing bottle cage braze-on mounts on the bike frame.
This direct mount option reduces the number of necessary straps required to mount the framebag to the bike.
Includes custom-made HDPE plastic stiffener, specially ordered low-profile M5 bolts, and nylon washers.
Bottom shape: (half frame bag)
Choose what shape you want the bottom profile of the bag to be. We prefer a slightly tapered design front to back.
Bag width:
A regular 2 3/8 – 2.5″ width should be suitable for most bikes. If your bike has narrow diameter tubes (such as on an old steel road bike), 2.25 or 2″ might be more suitable.
Drain hole:
The drain hole option adds a grommet hole at the bottom of the bag. Gives water a way out of the bag if it finds a way in.
Divider:
Horizontal and vertical dividers add a length of 2″ wide soft velcro to both halves of the bag, allowing you to install or remove the provided divider.Â
A horizontal zippered divider does the same, except there is a zippered divider installed right below the divider.
Zippered side pocket:
With the zippered side pocket option, a full-length pocket is installed on the non-driveside of the bike.
This flat pocket is excellent for smaller, quick-access items such as a phone, wallet, electronics, or extra snacks. Includes a passthrough to the main compartment for routing cables.
Stretchy mesh side pocket:
Adds a pocket on the outside non-driveside of the bike using soft mesh and elastic edge binding. Typically divided down the center into two.
Pockets in main compartment:
With the additional pockets option, a row of 2-3 flat pockets is sewn into the liner fabric, providing additional organization options inside the bag.
Hanging loops:
With the hanging loops option, 1″ wide nylon webbing is sewn to the inside perimeter of the bag, creating a series of loops for the provided Velcro OneWrap straps to be secured through.
This option allows for securing a bike pump, tent poles, Aeropress, or other bulkier items out of the way.
Â
We require you to follow the instructions posted on the template page in order for us to create our full-scale digital template to work with.
$249.99
The frame bag utilizes the space of your bike frame in order to carry more gear without much added weight or aerodynamic penalties. Perfectly fit to your bike and fully customizable.
Requires a custom frame bag token to purchase.
FEATURES:
Lead-times apply to this product!
Only 2 left in stock
Select from the following options:
Daisy-chain:
With the daisy-chain option, 1″ wide nylon webbing is sewn to the perimeter of the bag, creating a series of loops for the provided Velcro OneWrap straps to be secured through.
This option allows for easy installation and is most likely to fit multiple bikes because of the adjustable strap positioning.
Velcro:
With the Velcro option, 2″ wide Velcro is carefully positioned and sewn into the seam of the bag, around any existing cables and braze-ons.
This option allows for easy installation and removal and pulls the bag tight, reducing the amount of side bulge.
Lace-up:
With the lace-up option, custom cut black CSM (formerly Hypalon) or beige 3/4″ webbing loops are sewn into the seam of the bag, allowing for the option of shock cord or paracord to be interlaced over the bike frame tubing.
The shock cord lace-up option provides zipper relief when the bag is fully loaded.
Unlike Velcro, the lace-up connection doesn’t catch on clothing.
With the bolt-on option, metal oblong grommets are installed into the perimeter of the bag, carefully aligned with the existing bottle cage braze-on mounts on the bike frame.
This direct mount option reduces the number of necessary straps required to mount the framebag to the bike.
Includes custom-made HDPE plastic stiffener, specially ordered low-profile M5 bolts, and nylon washers.
Bottom shape: (half frame bag)
Choose what shape you want the bottom profile of the bag to be. We prefer a slightly tapered design front to back.
Bag width:
A regular 2.5″ width should be suitable for most bikes. If your bike has narrow diameter tubes (such as on an old steel road bike), 2.25 or 2″ might be more suitable.
Drain hole:
The drain hole option adds a grommet hole at the bottom of the bag. Gives water a way out of the bag if it finds a way in.
Â
Divider:
Horizontal and vertical dividers add a length of 2″ wide soft velcro to both halves of the bag, allowing you to install or remove the provided divider.Â
A horizontal zippered divider does the same, except there is a zippered divider installed right below the divider.
Zippered side pocket:
With the zippered side pocket option, a full-length pocket is installed on the non-driveside of the bike.
This flat pocket is excellent for smaller, quick-access items such as a phone, wallet, electronics, or extra snacks. Includes a passthrough to the main compartment for routing cables.
Stretchy mesh side pocket:
Adds a pocket on the outside non-driveside of the bike using soft mesh and elastic edge binding. Typically divided down the center into two.
Pockets in main compartment:
With the additional pockets option, a row of 2-3 flat pockets is sewn into the liner fabric, providing additional organization options inside the bag.
Hanging loops:
With the hanging loops option, 1″ wide nylon webbing is sewn to the inside perimeter of the bag, creating a series of loops for the provided Velcro OneWrap straps to be secured through.
This option allows for securing a bike pump, tent poles, Aeropress, or other bulkier items out of the way.
Â
We require you to follow the instructions posted on the template page in order for us to create our full-scale digital template to work with.